CHANGE/VIEW SET TEMPERATURE


Follow these steps to change or view Set Temperature:
1 – Start at the Main screen (A), and press the SELECT navigation button to view the temperature menu (D). If the selection box is on a message icon (H), press the RIGHT navigation button and then the SELECT navigation button to view the Temperature menu.
2 – The center box (E) indicates the current Set Temperature.
3 – Press (or press-and-hold) the RIGHT or LEFT navigation buttons to change the Set Temperature
4 – Once the desired Set Temperature is in the center box, press the SELECT navigation button to exit the Temperature menu. Or, wait a few seconds, and the panel will exit the Temperature menu automatically.
How do I view the water temperature?
The water temperature is displayed on the Main screen (B).
How do I know when the water heater is On?
The center of the Heater Status icon turns red (C). The center flashes red when the heater is preparing to turn On. The center turns white (G) when the heater is Off.
What do the dashes mean (F)?
They indicate that the spa control has not checked the water temperature for approximately an hour. A pump needs to cycle water through the heater for the control system to check the water temperature. After water cycles through the heater for 1 minute, the dashes are replaced with the current water temperature (B). Whenever the control system is powered On, dashes appear (F) for one minute while a pump cycles water through the heater to check the current water temperature.